GS1350-18HP 16-Port Gigabit PoE+ L2 Web Managed Switch.GS1350-12HP 8-Port Gigabit PoE+ L2 Web Managed Switch.GS1350-6HP 5-Port Gigabit PoE+ L2 Web Managed Switch.Umanaged Gigabit and Multi-Gig Switches.Click once on the configured rule and click above Connect. Please proceed to configure the remote site vice versa.Īfter setting up both sites, navigate to Configuration > VPN > IPsec VPN > Connection Configuration. Local policy refers to the network, which is to be locally accessible through the VPN-tunnel, while the remote policy determines the subnet, which should be accessible remotely through the VPN Tunnel. The remote policy is the local network on the other device, in this example 192.168.2.0/24. Type in your local policy, which by default might be 192.168.1.0/24. Check also nailed up (is needed to keep the VPN tunnel up and running). After that hit the “OK”-button.Ĭheck the enable box to activate the rule. Type a key in which is used to authenticate the VPN tunnel. The peer gateway address is the WAN IP (public IP) from the other device. The interface is your outgoing port to the outside of you network à WAN. The IP addresses which are used are only examples please use your own IP addressesĮnable the rule to make it possible to use the gateway.
Then you click on add and a window opens. This tutorial will get your VPN-tunnel connected in no time!įirst of all you have to configure the gateway which you can find by Configuration > VPN > IPsec VPN > Gateway Configuration. One of the key features of the VPN2S is it's capability of setting up a VPN tunnel - as the name says.
0 kommentar(er)
